gl05t to gl24t www.vishay.com vishay semiconductors rev. 1.8, 09-jun-11 1 document number: 85809 for technical questions, contact: esdprotection@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 low capacitance esd protection diodes for high-speed data interfaces marking (example only) bar = cathode marking yyy = type code (see table below) xx = date code features ? iec 61000-4-5 (lightning) see i ppm below ? esd-protection acc. iec 61000-4-2 8 kv contact discharge 15 kv air discharge ? small package for use in portable electronics ? space saving sot-23 package ? high temperature soldering guaranteed: 260 c/10 s at terminals ? low capacitance for high speed data lines, cellular handsets, usb port prot ection, lan equipment, peripherals ? aec-q101 qualified ?e3 - sn ? compliant to rohs directive 2002/95/ec and in accordance to weee 2002/96/ec note ** please see document vishay material category policy: www.vishay.com/doc?99902 20512 1 17416 1 2 3 20357 yyy xx xx ordering information device name environmental status ordering code taped units per reel (8 mm tape on 7" reel) minimum order quantity gl05t standard gl05t-gs08 3000 15 000 green GL05T-V-G-08 gl12t standard gl12t-gs08 3000 15 000 green gl12t-v-g-08 gl15t standard gl15t-gs08 3000 15 000 green gl15t-v-g-08 gl24t standard gl24t-gs08 3000 15 000 green gl24t-v-g-08 package data device name package name type code environmental status weight molding compound flammability rating moisture sensitivity level soldering conditions gl05t sot-23 l05 standard 8.8 mg ul 94 v-0 msl level 1 (according j-std-020) 260 c/10 s at terminals l06 green 8.1 mg ul 94 v-0 msl level 1 (according j-std-020) 260 c/10 s at terminals gl12t sot-23 l12 standard 8.8 mg ul 94 v-0 msl level 1 (according j-std-020) 260 c/10 s at terminals l13 green 8.1 mg ul 94 v-0 msl level 1 (according j-std-020) 260 c/10 s at terminals gl15t sot-23 l15 standard 8.8 mg ul 94 v-0 msl level 1 (according j-std-020) 260 c/10 s at terminals l16 green 8.1 mg ul 94 v-0 msl level 1 (according j-std-020) 260 c/10 s at terminals gl24t sot-23 l24 standard 8.8 mg ul 94 v-0 msl level 1 (according j-std-020) 260 c/10 s at terminals l25 green 8.1 mg ul 94 v-0 msl level 1 (according j-std-020) 260 c/10 s at terminals
gl05t to gl24t www.vishay.com vishay semiconductors rev. 1.8, 09-jun-11 2 document number: 85809 for technical questions, contact: esdprotection@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 absolute maximum ratings gl05t parameter test conditions symbol value unit peak pulse current 8/20 s i ppm 17 a peak pulse power 8 /20 s waveform p pp 300 w esd immunity contact discharge acc. iec 61000-4-2; 10 pulses v esd 8 kv air discharge acc. iec 61000-4-2; 10 pulses 15 kv operating temperature junction temperature t j - 55 to + 125 c storage temperature t stg - 55 to + 150 c absolute maximum ratings gl12t parameter test conditions symbol value unit peak pulse current 8/20 s i ppm 12 a peak pulse power 8 /20 s waveform p pp 300 w esd immunity contact discharge acc. iec 61000-4-2; 10 pulses v esd 8 kv air discharge acc. iec 61000-4-2; 10 pulses 15 kv operating temperature junction temperature t j - 55 to + 125 c storage temperature t stg - 55 to + 150 c absolute maximum ratings gl15t parameter test conditions symbol value unit peak pulse current 8/20 s i ppm 10 a peak pulse power 8/20 s waveform p pp 300 w esd immunity contact discharge acc. iec 61000-4-2; 10 pulses v esd 8 kv air discharge acc. iec 61000-4-2; 10 pulses 15 kv operating temperature junction temperature t j - 55 to + 125 c storage temperature t stg - 55 to + 150 c absolute maximum ratings gl24t parameter test conditions symbol value unit peak pulse current 8/20 s i ppm 5a peak pulse power 8/20 s waveform p pp 300 w esd immunity contact discharge acc. iec 61000-4-2; 10 pulses v esd 8 kv air discharge acc. iec 61000-4-2; 10 pulses 15 kv operating temperature junction temperature t j - 55 to + 125 c storage temperature t stg - 55 to + 150 c electrical characteristics gl05t parameter test conditions/remarks symbol min. typ. max. unit protection paths number of li nes which can be protected n channel ---lines reverse stand-off voltage at i r = 1 a v rwm --5v reverse current at v r = 5 v i r - - 20 a reverse breakdown voltage at i r = 1 ma v br 6--v reverse clamping voltage at i pp = 1 a v c --9.8v at i pp = 5 a - - 11 v capacitance at v r = 0 v; f = 1 mhz c d -5-pf
gl05t to gl24t www.vishay.com vishay semiconductors rev. 1.8, 09-jun-11 3 document number: 85809 for technical questions, contact: esdprotection@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 package dimensions in millimeters (inches): sot-23 electrical characteristics gl12t parameter test conditions/remarks symbol min. typ. max. unit protection paths number of lin es which can be protected n channel ---lines reverse stand-off voltage at i r = 1 a v rwm --12v reverse current at v r = 5 v i r --1a reverse breakdown voltage at i r = 1 ma v br 13.3 - - v reverse clamping voltage at i pp = 1 a v c --19v at i pp = 5 a - - 24 v capacitance at v r = 0 v; f = 1 mhz c d -5-pf electrical characteristics gl15t parameter test conditions/remarks symbol min. typ. max. unit protection paths number of lin es which can be protected n channel ---lines reverse stand-off voltage at i r = 1 a v rwm --15v reverse current at v r = 5 v i r --1a reverse breakdown voltage at i r = 1 ma v br 16.7 - - v reverse clamping voltage at i pp = 1 a v c --24v at i pp = 5 a - - 33 v capacitance at v r = 0 v; f = 1 mhz c d -5-pf electrical characteristics gl24t parameter test conditions/remarks symbol min. typ. max. unit protection paths number of lin es which can be protected n channel ---lines reverse stand-off voltage at i r = 1 a v rwm --24v reverse current at v r = 5 v i r --1a reverse breakdown voltage at i r = 1 ma v br 26.7 - - v reverse clamping voltage at i pp = 1 a v c --43v at i pp = 5 a - - 55 v capacitance at v r = 0 v; f = 1 mhz c d -5-pf foot print recommendation: rev. 8 - date: 23. s ept.2009 17418 document no.: 6.541-5014.01-4 0.9 (0.035) 1 (0.039) 0.9 (0.035) 1 (0.039) 1.43 (0.056) 0.45 (0.018) 0.35 (0.014) 2.8 (0.110) 3.1 (0.122) 0.45 (0.018) 0.35 (0.014) 0.45 (0.018) 0.35 (0.014) 0.1 (0.004) max. 2.35 (0.093) 2.6 (0.102) 0.175 (0.007) 0.098 (0.004) 1.15 (0.045) 0.9 (0.035) 1.20 (0.047) 0.95 (0.037) 0.95 (0.037) 2 (0.079) 0.7 (0.028) 0.9 (0.035) 0 to 8 0.2 (0.008) 0.3 (0.012) 0.5 (0.020) 0.550 ref. (0.022 ref.)
gl05t to gl24t www.vishay.com vishay semiconductors rev. 1.8, 09-jun-11 4 document number: 85809 for technical questions, contact: esdprotection@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 pin 1 - location top view pad layout - view from top s een at bottom s ide llp1713 llp2513 llp3313 pin 1 - location pin 1 - location top view top view pad layout - view from top s een at bottom s ide pad layout - view from top s een at bottom s ide
sot-23 vishay semiconductors sot-23 document number: 84004 for technical ques tions within your region, please cont act one of the following: www.vishay.com rev. 1.3, 01-jul-10 diodes americas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com 28 package dimensions in millimeters (inches) foot print recommendation: rev. 8 - date: 23. s ept.2009 17418 document no.: 6.541-5014.01-4 0.9 (0.035) 1 (0.039) 0.9 (0.035) 1 (0.039) 1.43 (0.056) 0.45 (0.018) 0.35 (0.014) 2.8 (0.110) 3.1 (0.122) 0.45 (0.018) 0.35 (0.014) 0.45 (0.018) 0.35 (0.014) 0.1 (0.004) max. 2.35 (0.093) 2.6 (0.102) 0.175 (0.007) 0.098 (0.004) 1.15 (0.045) 0.9 (0.035) 1.20 (0.047) 0.95 (0.037) 0.95 (0.037) 2 (0.079) 0.7 (0.028) 0.9 (0.035) 0 to 8 0.2 (0.008) 0.3 (0.012) 0.5 (0.020) 0.550 ref. (0.022 ref.)
document number: 91 000 www.vishay.com revision: 11-mar-11 1 disclaimer legal disclaimer notice vishay all product, product specifications and data ar e subject to change without notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectivel y, vishay), disclaim any and all liability fo r any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicab le law, vishay disc laims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, incl uding without limitation specia l, consequential or incidental dama ges, and (iii) any and all impl ied warranties, including warran ties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of pro ducts for certain types of applications are based on vishays knowledge of typical requirements that are often placed on vishay products in gene ric applications. such statements are not binding statements about the suitability of products for a partic ular application. it is the customers responsibility to validate that a particu lar product with the properties described in th e product specification is su itable for use in a particul ar application. parameters provided in datasheets an d/or specifications may vary in different applications and perfo rmance may vary over time. all operating parameters, including typical pa rameters, must be validated for each customer application by the customers technical experts. product specifications do not expand or otherwise modify vishays term s and conditions of purchase, including but not limited to the warranty expressed therein. except as expressly indicated in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vishay product co uld result in person al injury or death. customers using or selling vishay products not expressly indicated for use in such applications do so at their own risk and agr ee to fully indemnify and hold vishay and it s distributors harmless from and against an y and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that vis hay or its distributor was negligent regarding the design or manufact ure of the part. please contact authorized vishay personnel t o obtain written terms and conditions regarding products designed fo r such applications. no license, express or implied, by estoppel or otherwise, to any intelle ctual property rights is gran ted by this document or by any conduct of vishay. product names and markings noted herein may be trademarks of their respective owners.
|
